Click to Home
Go To Search
Explore Eugene
TwitterFacebookPrint

Wastewater Division
410 River Ave.
Eugene, OR 97404
Ph: 541-682-8600
Fx: 541-682-8601
Email: webweaver.ww@ci.eugene.or.us

Info Advanced
Plant Operations Overview
Water Pollution Control Facility
The Water Pollution Control Facility is located at 410 River Avenue in the City of Eugene.
The facility services the cities of Eugene and Springfield and the surrounding areas.
Arial view of the Wastewater Treatment plant on River Ave.
Plant Design Criteria
  • Average dry weather flow- 34 million gallons per day
  • Peak wet weather flow- 277 million gallons per day

Wastewater is treated in four separate processes before being discharged into the Willamette River. The solids that are removed undergo further treatment for their conversion to biosolids.
Click here to learn more about the process environment
Pretreatment
Pretreatment consists of receiving wastewater from the regional collection system and removing sand and debris, reducing the size of solids and injecting air (aeration) to remove odorous gases.

Pretreatment facts and figures
  • 3 bio-filters scrub odorous air
  • 4 preaeration chambers, each with a volume of 152,000 gallons
  • 6 grit removal units
  • 48 pump stations
  • 850 miles of regional sewer line

Primary Treatment
Primary treatment removes solids and scum through settling and skimming. Solids and scum are pumped to anaerobic digesters.

Primary treatment equipment includes 4 primary clarifiers, each 135 feet in diameter with a capacity of 1.48 million gallons.

Secondary Treatment
Secondary treatment consists of aerating and recycling bacteria. This biological process converts fine particles and dissolved organic matter into settleable solids.

Secondary treatment facts and figures:
  • 6 1,000-horsepower blowers supply the air to the basins
  • 8 aeration basins, each with a volume of 2.2 million gallons

  • 10 secondary clarifiers
  • The basins can handle 45,000 pounds of organics a day

Final Treatment
Final treatment consists of disinfection by chlorination followed by addition of sulfur dioxide to dechlorinate. The treated wastewater is then discharged into the Willamette River.

Final treatment facts and figures:
  • 6 chlorine contact chambers, capable of treating 277 million gallons a day
  • Discharge pollutant levels are regulated through National Pollution Discharge Elimination System (NPDES) permit issued by DEQ (dechlorination of plant effluent is required year round)

Sludge Conditioning
Sludge conditioning and anaerobic digestion are the main elements of the solids treatment process. Solids removed in primary treatment are pumped directly to anaerobic digesters. Sludge from secondary treatment is thickened by a gravity belt drainage process and is then fed to the digesters. The digesters use anaerobic bacteria to decompose and stabilize the organic portion.

Methane gas, a useful byproduct, is formed in the digestion process. Methane is used to fuel engines for power generation. Heat also is recovered from the engines in a closed loop hot water supply system. The system provides the heat necessary for the sludge digestion process.

Sludge conditioning/anaerobic digestion facts and figures:
  • 1 800-kilowatt-per-hour engine generators operate on digester gas
  • 2 3-meter gravity belt thickeners are used to thicken the secondary treatment sludge
  • 3 anaerobic digesters, each with a capacity of 1 million gallons